Reline-It
- For upper or lower dentures
- Long-lasting reliner for a soft, snug fit
- Make loose fitting dentures feel like new
- In the box2 Relines
Make Loose Fitting Dentures Feel Like New! Dentemp Reline-It Denture Reliner makes dentures fit like new and is easy to use. Everyone deserves sound, well-fitting dentures. Over time, your dentures will feel looser. Reline-It gives you the stability not offered by thick layers of denture adhesive.
Reline-It is designed for use on traditional acrylic dentures, both upper and lower. Reline-It tightens, cushions and relieves irritation caused by loose-fitting dentures for a long-lasting and comfortable fit. Keep your dentures fitting better longer.
- Improves denture fit
- Easy to use
- Advanced, zinc-free formula
- Quick application time
How to use Reline-It
Step 1: Clean and dry denture thoroughly.
Step 2: Place one packet of powder and one packet of liquid into a freezer for 15 minutes. IMPORTANT, DO NOT SKIP THIS STEP.
Step 3: Immediately upon removal from the freezer, quickly mix reliner liquid and powder as follows:
- Place contents of one Reline-it Powder packet into one of the enclosed mixing cups.
- Hold a Reline-it Liquid packet in one hand and gently tear off the notched end so as not to spill any of the liquid. Hold the open end of the packet directly over the powder, and add ALL of the liquid to the powder in the mixing cup. (Be careful not to get any Reline-it Liquid onto your skin. This liquid is flammable. Do not use near sparks or an open flame. Use in a well ventilated area.)
- Using the spatula, mix until the mixture becomes smooth with a creamy consistency, like syrup.
Step 4: Continue to mix for 30 seconds, then immediately pour the mixture onto the denture and spread evenly across the surface.
Step 5: Allow the mixture to set for 3 more minutes. Make sure that your gums and palate are moist, then place the denture into your mouth.
Step 6: Bite down, and hold the denture in the correct biting position for 6 minutes (Figure 4). A slight tingling sensation of the gums or palate may be experienced. NOTE: A small number of people may have a sensitivity to this product. If the tingling makes you feel uncomfortable, remove the denture immediately and remove the reline material from the denture. See your dentist for relining.
Step 7: Take out of mouth and rinse with COLD water.
Step 8: Using the enclosed spatula, trim off any excess material that overlapped denture.
Step 9: Place denture in HOT tap water (not boiling) and let set for 20 minutes. Then add 1 teaspoon of Baking Soda to 1 cup of warm water, and soak the denture for another ten minutes to remove any taste. Alternatively, soak denture in your usual denture cleaner following their instructions.
Step 10: Wash (rinse) denture again in cold water, and trim any excess material from denture that was left behind the first time.
Step 11: Place denture back into mouth to begin using.
Step 12: Rinse off spatula and save for future use. Wash hands thoroughly.
NOTE: After relining has been completed, if for any reason the denture is uncomfortable or does not fit, do not use it. Remove the liner material and see your dentist immediately.
NOTE: How to remove Reline-it - Do not use any sharp or metal objects. Using your thumb, keep lifting from the underside edge of the reline until enough is lifted where you can grab it with 2 fingers and peel it off gently. If you have difficulty, contact us for help or ask your dentist.
READ DIRECTIONS CAREFULLY BEFORE USING. KEEP OUT OF REACH OF CHILDREN.
WARNINGS: Denture reliner liquid is flammable. Keep away from heat, open flames or sparks; Avoid getting denture reliner liquid on skin. If you do, wash area with water immediately. Contains methacrylates. Do not use if you are allergic or sensitive to methacrylates or other ingredients. Do not use on 3D Printed Dentures or Valplast (soft/flexible) Dentures. Do not inhale vapors from denture reliner liquid. Use in a well-ventilated area. Do not use over an existing reline. Remove old reline first. For temporary refitting of dentures between dental visits. For best results, use up to one week per application. Improper or long term use of denture cushions, pads or reliners may lead to faster gum erosion, irritation and sores. For use only until a dentist can be seen.
Liquid - Ethyl Alcohol, Ethyl Acetate
Powder - Poly(ethyl methacrylate)
Is Reline-It a denture adhesive?
No, Reline-It is a denture reliner. It does not adhere directly to your gums but rather gives your dentures a better fit.
What can I do about lumps in the material when I mix the liquid and powder?
Make sure to squeeze all the liquid out of the packet to achieve the correct consistency.
The product is hardening too quickly during application. What should I do?
Before mixing, place one unopened packet of powder and one unopened tube of liquid into a freezer for 15 minutes. Putting the product in the freezer will slow down the quick set up time.
What if I left Reline-It in the freezer for more than 15 minutes?
If the product has been in the freezer for over 30 minutes, it may not mix properly. Let it sit at room temperature to thaw until it softens slightly but remains cool before use.
Can I use Reline-It past its expiration date?
We do not recommend using the product past its expiration date, as we cannot guarantee its effectiveness.
Will there be an odor while I am mixing the powder and liquid?
Yes. Mix in a well-ventilated area.
Can I use this product if I’m sensitive to methacrylates?
No, do not use Reline-It if you have a known sensitivity to methacrylates or other ingredients.
How long does each Reline-It application last?
Each application is intended to last up to 1 week for optimal comfort and effectiveness.
How long should I wait before eating or drinking after application?
Wait at least 3 hours before eating or drinking anything other than water.
Will I feel anything during the step where Reline-it shapes itself to my palate or gums?
You might feel a slight tingling sensation. This is normal and will disappear once the material is set after the final cure. NOTE: A small number of people may have sensitivity to this product. If the tingling makes you feel uncomfortable, remove the denture immediately and remove the reline material from the denture. See your dentist for relining.
Does Reline-It taste bad?
It might. After the Reline-it has shaped itself to your palate and has been placed in hot water for 20 minutes to set, place the denture in warm tap water with one teaspoon of Baking Soda for an additional 10 minutes.
How do I remove Reline-It?
Do not use any sharp or metal objects. Using your thumb, keep lifting from the underside edge of the reline until enough is lifted where you can grab it with two fingers and peel it off gently. If you are having difficulty, Soak in ice water, more ice than water, for a minimum of 4 hours, then take a toothpick or something pointed but not metal and get under the edge, It should flake off. If that doesn’t work then please contact your dentist for help.
Can Reline-It be used on lower dentures?
Yes. Reline-It can be used on lower or upper dentures.
Can Reline-It be used on partial dentures?
Yes, it can be used underneath the pink portion of acrylic partial dentures. Reline-it will not work on the metal portion of the partial denture.
Can Reline-It be used on Valplast (flexible) dentures?
No.
Can Reline-It be used on 3D printed dentures?
No.
How should I clean my dentures with Reline-It applied?
You can follow your usual cleaning routine. Gently brush or use a non-abrasive denture cleaner as directed.
Can you still use cleaning tablets to soak your denture?
Yes, but we suggest to follow the instructions on the packaging, soak according to directions.
Can Denture adhesive be used if denture still fits loose?
Yes.
After putting liner in denture it still feels loose, can another liner be placed over it?
No. If denture still feels loose product needs to be removed and reapplied. This can happen if you bite down too hard during the molding stage. Use normal biting pressure.
Can Reline-It be used over a hard or soft liner put in by Dentist?
Reline-it can be used over a hard liner only. Product is not to be used over a soft liner as it will not be able to be removed later.
Questions about using it?
- RealCustomer Feedback
- SecurePayment Options
- DependableCustomer Service




